Shrink Material Machinery Nickel Strip Thermal Products Wire & Connector Battery & Packs
   
Heat Shrink Machine
Cutting Machine
Spot Welding Machine
   
 
   
1. AC Type : TSA-500
2. Condenser Type : TSC-500
3. Inverter Type : TSI-300
4-1. Tr/Polarity Fine Welder : TSF-330P
4-2. Welder Controller : DSC-300DV
5. Welder Head : TSH-20F
6. Welder Electrode

 
 

 

 

1. AC Type : TSA-500
Feature
  1. Wide welding application by adjustable welding time and current
  2. 1 chip Microprocessor control
  3. Easy operation
  4. Immediate weld current use
  5. Fast weld rate(speed)
  6. Energy sensitive to line voltage changes - weak point
Specification
  1. Transformer : TST-5T
  2. Rate Capacity : 5KVA
  3. Input Voltage : 1Ø 220V 50/60Hz
  4. Max. Current : 2,000A
  5. Dimension : 145(W) x 215(H) x 260(D)mm
  6. Driving Force : Foot treadle
  7. Weld Head : TSH-20F
  TSA-500
Transformer
 TST-5T TST-10T
Input Power
 5KVA 10KVA
Input Voltage
 1Ø 220V 50/60Hz
Max. Current
 2,000A
 4,000A
Dimesion TSA-500 : 145(W) x 215(H) x 260(D)mm
TST-5T, TST-10T : 160(W) x 215(H) x 260(D)mm

 
 

 

 

2. Condenser Type : TSC-500
Feature
  1. Welding energy stored in condenser prior to weld
  2. Slow weld rate(speed)
  3. Good to weld small metals, nonferrous metals and other foreign metals
  4. Good welding quality
  5. Non oxidization in welding
  6. Stable welding quality even input voltage is varied.
Specification
  1. Input Voltage : 1Ø 220V 50/60Hz
  2. Rate Capacity : 1KVA
  3. Max. Output : 500 W/S
  4. Capacitor Capacity : 12,000μF
  5. Welding Capacity : up to 0.5mm(T)
  6. Driving Force : Foot treadle
  7. Weld Head : TSH-20F
Model TSC-100 TSC-200 TSC-500 TSC-1000 TSC-1500 TSC-2000 TSC-6000
Input Voltage 1Ø 220V ← ← ← ← ← ←
Input Power 0.3KVA 0.6KVA 1KVA 2KVA 3KVA 4KVA 12KVA
Output(W/S) 100 200 500 1,000 1,500 2,000 6,000
Capacitor(μF) 3,000 6,000 12,000 19,500 28,500 37,500 109,500
Welding Thickness 0.2mm 0.3mm 0.5mm 1.0mm 1.2mm 1.3mm 2.3mm

 
 

 

 
3. Inverter Type : TSI-300
Feature

  1. DC constant current resistance welding
  2. Microprocessor control with 8 welding schedules
  3. Available to monitor welding current
  4. High quality welding by dual current control
  5. Easy operation and fine welding quality
  6. Rapid welding response by high frequency inverter control
 
Specification
  1. Transformer : TST-300T
  2. Input Voltage : 1Ø 220V 50/60Hz
  3. Output Current : 3,000A
  4. Control Frequency : 4 KHz
  5. Control Method : Constant current
  6. Cooling System : Air forced cooling
  7. Welding Schedule : 8 schedules
  8. Dimension : 160(W) x 260(H) x 355(D)mm
  9. Driving Force : Foot treadle
  10. Weld Head : TSH-20F
Model TSI-130 TSI-105 TSI-300
Transformer built-in type TST-105T TST-300T
Input Voltage 3Ø 220V 3Ø 220V 3Ø 220V
Output Current 1,300A 1,500A 3,000A
Control Frequency 4KHz 4KHz 4KHz
Control Method Constant Current Constant Current Constant Current
Cooling Method Cooling fan Cooling fan Cooling fan
Welding Schedule 8 Schedule 8 Schedule 8 Schedule
Dimension
 160(W) x 260(H)
x 400(D)
TSI-105, 300 : 160(W) x 260(H) x 355(D)
TST-105T : 160(W) x 215(H) x 260(D)
TST-300T : 160(W) x 260(H) x 355(D)

 

 
 

 

 

4-1. Tr/Polarity Fine Welder : TSF-330P
Feature
  1. Available high quality welding by controlling constant voltage with the method of detecting load voltage and feedback.
  2. Uniform welding quality by main welding after preheating
  3. Due to short welding time by continuity of energy density, minimize deformation and/or discoloration of raw material.
  4. Easy monitoring of welding results by setting of max/min weld current and applicable in automatic welding system.
  5. As welding current is raised by control of constant voltage, welding result is ensured.
  6. Available to use by home AC power supply.
 

 
 

 

4-2. Welder Controller : DSC-300DV

  1. Input Voltage : AC 220V 50/60Hz single phase
  2. Output : 300W/S
  3. Capacitor : 6,000㎌
  4. Welding Thickness : 0.3mm
  5. Welder controller only

    * Working table is not included
    * Welder Head, Foot Pedal, Chain and Welder Electrode are to be provided.
 

 

 
 

 

 
5.Welder Head : TSH-20F
Feature
  1. Good to use for two points spot welding for battery packs.
  2. Solid structure using the parts with strong durability.
  3. Pressure control and electrode gap adjustable.
  4. Easy to replace welder electrode.
 



     
 

 


Machined Tip Flat-Tip

6.Welder Electrode
  1. Material : Copper-chrome
  2. Dimension : 3mm x 1m length bar
  3. Cut into proper length with Flat-Tip and/or work into Machined Tip.